Floor selection tips

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Floor selection tips
01-26-2018, 04:51 AM (This post was last modified: 01-26-2018 04:52 AM by xuanjin.)
Post: #1
Floor selection tips
1, product identification: the product must have the national authority of the test report, the product packaging also have a complete logo.mini white picket fencing
2, wear rotation: home floor wear rotation is usually used more than 4000 rpm enough, public places usually use 9000 rpm above.
3, formaldehyde content: formaldehyde content of the floor standard is divided into E2, E1, E0 three levels, E1 products formaldehyde emission limit is ≤ 1.5mg / L, E1 generally reach this level is in line with national quality requirements.
4, the substrate density: laminate flooring substrate density should be 0.84-0.9 / cm3 smoked density is too low or too high are not appropriate.flooring for porch uk
5, water resistance: The index value is high, poor water resistance, easy to cause changes in size under wet conditions, absorbent thickness expansion rate should be ≤ 2.5%.log home wall panels
6, processing density: Observe whether the product is smooth, tongue and groove bite is appropriate, should not be too loose, it should not be too tight.

Floor selection tips
1, product identification: the product must have the national authority of the test report, the product packaging also have a complete logo.mini white picket fencing
2, wear rotation: home floor wear rotation is usually used more than 4000 rpm enough, public places usually use 9000 rpm above.
3, formaldehyde content: formaldehyde content of the floor standard is divided into E2, E1, E0 three levels, E1 products formaldehyde emission limit is ≤ 1.5mg / L, E1 generally reach this level is in line with national quality requirements.
4, the substrate density: laminate flooring substrate density should be 0.84-0.9 / cm3 smoked density is too low or too high are not appropriate.flooring for porch uk
5, water resistance: The index value is high, poor water resistance, easy to cause changes in size under wet conditions, absorbent thickness expansion rate should be ≤ 2.5%.log home wall panels
6, processing density: Observe whether the product is smooth, tongue and groove bite is appropriate, should not be too loose, it should not be too tight.
Find all posts by this user
Quote this message in a reply
Anunt important
Daca ti-a fost de folos articolul de mai sus te rugam sa ne sustii in semn de apreciere.
Ar insemna foarte mult pentru noi daca ai apasa oricare din butoanele de recomandare de mai jos (in special pe cel de facebook) sau chiar pe mai multe.
Faptul ca suntem apreciati ne motiveaza sa facem o treaba mai buna si implicit sa oferim mai mult, ajuta comunitatea sa creasca.

Post Reply 


Messages In This Thread
Floor selection tips - xuanjin - 01-26-2018 04:51 AM



User(s) browsing this thread: 1 Guest(s)

Siteuri partenere in limba Romana:

Joaca sah online, Coduri GTA, GTA Romania, Asistenta iT, Coduri Counter Strike, Coduri CS,